![]() |
|
||||||
|
|
|||||||
|
|||||||
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| All passenger cars equipped with ABS have four-wheel ABS. SUVs, trucks, and vans equipped with ABS may have either four-wheel or two-wheel ABS. Brakes may fail after being repaired or lack of it. Disc brakes on the front wheels of every new vehicle are significantly more effective, but drum braking systems still can fade and fail when hot. Also there are manufacture recalls for faulty brakes. These recalls happen after reports about bad braking systems which have leaded to serious injury or death! Contact our New York Car Accident Lawyers to help you with your faulty brake claim
What causes disc brakes to drag? Several malfunctions are possible. On the floating caliper, single piston design, the most likely culprits are a build-up of dirt, corrosion, or loss of the protective lubrication on the guide pins, sleeves or ways. These cause the caliper to not fully retract when the brake pedal is released. A vehicle collision could happen. However, certain malfunctions may cause a disc brake to drag. This drag will reduce mpg and result in premature brake pad and rotor wear. Disc brakes are used primarily on front wheels but are also used on the rear of some vehicles. It is critical for vehicle safety for disc brakes to operate properly! ABS (Anti Blockier System) helps prevent a vehicle’s wheels from
locking during “panic” braking, which allows the driver to
maintain greater steering control as the vehicle is quickly slowed. In fact, you still may lose control when driving at excessive speed or during extreme steering maneuvers. In vehicles with two-wheel ABS, the front wheels can still lock during hard or panic braking and this lockup can result in the loss of steering control. Contact us today for your
free case consultation (718) 858-3100
|
Copyright ©
2008 Brooklyn Car Accidents.com - All
rights reserved |